 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IHB100SC 100 Watt Single Output Half Brick DC/DC Converter OBSOLETE PRODUCT Contact factory for replacement model RoHS Compliant 33-75V Input Range 1500VDC Isolation Between Input and Output High Efficiency: 86% Typical Operation to 100 C Baseplate Temperature 50 S Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off External Synchronization IHB100SCC Series Are Approved to UL/CUL 1950, EN 60950 The IHB100SC series standard half brick modules are designed for today's demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltage and no need for minimum loading. ISO9001 CERTIFIED PRODUCT SELECTION CHART MODEL IHB100S4803C IHB100S4805C INPUT VOLTAGE (VDC) 48 (33-75) 48 (33-75) RATED VOUT (VDC) 3.3 5.1 RATED MAXIMUM IOUT (A) 30 20 ABSOLUTE MAXIMUM RATINGS Output Short-Circuit Duration Continuous Baseplate Temperature Storage Temperature Input to Output Isolation +100C +125C 1500 VDC EFFICIENCY vs TEMPERATURE TCASE = +40C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified.* Change in Efficiency (%) Case Temperature (C) SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. PARAMETER Voltage Range Reflected Ripple Current Input Ripple Rejection Maximum Input Current No Load Power Dissipation Inrush Charge Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled CONDITIONS Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, Min 33 50 TYP 48 60 MAX 75 370 UNITS VDC mA dB A W mC mA mA INPUT 5 6 0.247 7.5 15 10 20 PARAMETER ISOLATION Input to Output Input to Baseplate Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance CONDITIONS Peak Test MIN 1500 1500 10 TYP MAX UNITS VDC VDC M pF A, rms VISO = 240VAC, 60Hz VIN = Nominal, IO=INOM Within 1% of Nominal VOUT Open Collector/Drain VIN = VMAX 2000 180 1 5 3.5 % mSec GENERAL 7 0.8 Open Collector 100 0.4 Open Collector 440 150 4 0 470 470 480 520 320 47 5 1 490 3 (85) +100 +125 +115 8.2 mA V Open Collector/Drain A V KHz nSec V V KHz oz (g) C C C C/W Case Temperature -40 -55 +100 Case to Ambient * See Application Notes available on the web at www.murata-ps.com IHB100SC REV A (RoHS) 05/2006 2 PARAMETER CONDITIONS 100 Watts Max IO Nom VOUT Min Nom 50 3.3 15 100 .02 0.05 0.10 0.50 38 30 150 35 4.2 83 84 Max 100 30.0 200 3.80 .05 UNITS W V A mV V %/C % % A A mV Sec V % IHB100S4803C OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation IO = IO, Nom Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency 0 DC to 20MHz* * VIN, MinVINVIN, Max Min Load to Rated Load 3.15 1.00 38 250 50 5.0 50 to 100% Load Step VOUT, 1% of VOUT, Nom VIN=NOM, IO=30A PARAMETER CONDITIONS 100 Watts Maximum IO Nom VOUT Min Nom 50 5.1 10 100 .02 Max 100 20 150 5.50 .05 % 1.0 26.0 300 50 7.0 UNITS W V A mV V %/C IHB100S4805C OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation IO = IO, Nom Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency 0 DC to 20MHz* * VIN, MinVINVIN, Max 4.60 0.05 Min Load to Rated Load 0.10 0.5 26.0 20.0 200 35 % A A mV Sec V % 50 to 100% Load Step VOUT, 1% of VOUT, Nom VIN=NOM, IO=20A 6.0 86 87 *See Application Notes available on the web at www.murata-ps.com THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device's plastic body will not be compromised and internal temperatures within the converter will not exceed 175C. Care should be taken to control manual soldering limits identical to that of wave soldering. IHB100SC REV A (RoHS) 05/2006 3 MECHANICAL SIDE VIEW PIN SIDE DOWN PIN CONNECTIONS 1 2 3 4 5 6 7 8 PRIMARY ON/OFF -VIN +VIN SYNC IN TRIM +VOUT -VOUT SECONDARY ON/OFF PIN SIDE UP NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: 0.005" MECHANICAL TOLERANCE: 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2009 Murata Power Solutions, Inc. France: Japan: China: Germany: Munchen, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com IHB100SC REV A (RoHS) 05/2006 4 |
Price & Availability of IHB100S4805C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |